Let’s Roll Motorcycle Lift
$281.00
The lift has 1100 LB capacity featuring industrial, durable, rubber that protects the bottom of your bike. Your bike will not move or slide on the lift because of its excellent material properties.* So sturdy and secure only one person is needed to get the heavy bike up on this robust lift. The lift is low enough to slide under your bike and lift while it is resting on the kickstand. Works well with a 7/8″ deep well socket and swivel head ratchet. (Does not need to be a deep well or swivel head)


Additional Details & Specs:
PD Scissor Lift (Details)
The Lift has gone through testing to confirm engineering calculations and has been tested to failure. The root cause of the failure has been analyzed and the design has been changed to improve capacity. The failure point on the lift exceeds the rating of the lift and an unpublished service factor has been established. It is not published for consumer evaluation as that could be construed as an endorsement for additional capacity on the lift.
PD Scissor Lift (Specs)
• Lift weighs 24 lbs.
• 15 x 12 x 3.75” lowest position; 15 x 12 x 10.5” highest position
• Option with felt: 15 x 12 x 3.85”
• Textured, matte black, powder coat finish on US Steel
• Industrial rubber composition on the crossbars provide the best cross-linking material that gives incredible resilience, flexibility, and durability. The excellent material properties come from a molecular mesh structure that makes it unbeatable in terms of elasticity and resistance to aging.
• Made in Michigan USA
PD Motorcycle Dolly (Details)
• Super easy to move and doesn’t get hung up on concrete seams
• Bike tires are off the ground and the weight is off the suspension
• The bike is upright, resting on the frame, not the kickstand
• No tie-downs required to secure your motorcycle.
• Two ball-bearing casters have brakes already installed.
PD Motorcycle Dolly (Specs)
• Dolly weighs 40 lbs.
• Dimensions 35 x 18 x 9.5”
• Crossbars adjustable height; 1.5” increments.
• Textured, matte black, powder coat finish on US steel
• Original Zero-scuff™ 4″ casters will protect your epoxy or concrete floor.
• Industrial rubber composition on the crossbars provide the best cross-linking material that gives incredible resilience, flexibility, and durability. The excellent material properties come from a molecular mesh structure that makes it unbeatable in terms of elasticity and resistance to aging.
• Made in Michigan US
Will this system work with my Motorcycle?
(1) The first thing to check is that your bike’s frame is accessible without any piping, electrical cords, etc that could obstruct a scissor lift. In order to safely and stably pick up your bike the lift must be able directly contact the frame without hitting anything else.
Our Let’s Roll Lift is low profile and fits easily under most bikes, but the only way for you to really know is to check.
Let’s Roll Cruiser Dolly Measurements:
9″H x 18″W x 35″L
Let’s Roll Lift Measurements:
14 x 12 x 3.75″ in the resting position
14 x 12 x 12.5″ in the highest position
(2) After you verify the Let’s Roll Lift (or other scissor lift) will work, check that the dolly itself will also fit under the bike and be able to contact the frame without interference.
Let’s Roll Dolly Measurements:
Dolly frame with crossbars on top: 18″ Wide (outside dimensions), 14″ (inside dimensions)
Height dimensions: 9″ high setting, 7.75″ low setting
Total dolly length: 35″
Click button to view Compatibility Chart of Motorcycles that can be lifted with a scissor lift.
(This may not be complete, visually checking is always your best bet.)
LR Motorcycle Lift
- Textured, matte black, powder coat finish on US steel.
- Industrial rubber composition on the crossbars provide the best cross-linking material that gives incredible resilience, flexibility, and durability. This excellent material properties come from a molecular mesh structure that makes it unbeatable in terms of elasticity and resistance to aging.
- Tool operated, no hydraulic leaks and no ball-bearings.
LR Cruiser Motorcycle Dolly
- Textured, matte black, powder coat finish on US steel.
- Industrial rubber composition on the crossbars provide the best cross-linking material that gives incredible resilience, flexibility, and durability. This excellent material properties come from a molecular mesh structure that makes it unbeatable in terms of elasticity and resistance to aging.
- Original Zero-scuff™ 4” casters will protect your epoxy or concrete floor.
Reviews