The Ultimate Garage Solution for Indian Pursuit & Challenger
The Indian Pursuit and Challenger are heavy-duty machines, weighing in at nearly 950 lbs. Managing that weight in a tight garage—or even performing simple maintenance—can be a challenge.
Our Let's Roll system is engineered to handle these liquid-cooled giants with ease. Best of all? Unlike other Indian models, the Challenger and Pursuit frames allow for a direct lift—no adapter plate required.
Why It’s a Game Changer for Your Indian:
- Precision Engineering: Designed to fit the specific flat-frame points of the PowerPlus engine.
- Zero-Turn Mobility: Effortlessly move your bike into the tightest corners of your garage.
- Safe Maintenance: Securely lift the bike for cleaning, oil changes, or tire inspections without the fear of it tipping.
Step-by-Step Guide: Lifting Your Pursuit or Challenger
Step 1: Positioning the Lift
With your motorcycle on its kickstand, slide the Let’s Roll Scissor Lift under the bike from the throttle side (right side).
Pro Tip: Align the lift so it is centered under the engine's weight distribution. On the Pursuit/Challenger, you want the lift positioned directly under the flat portion of the crankcase/frame.
Step 2: Raising the Bike
Use a 7/8″ deep well socket with a swivel head ratchet or an 18v cordless drill.
- Important: If using a drill, ensure you are at a controlled speed.
- The "Pursuit Height": Because of the Pursuit's specific clearance, you will need to raise the lift all the way up to ensure the dolly has enough room to slide underneath.
Step 3: Deploying the Dolly
Once the bike is fully elevated, roll the Let’s Roll Dolly in from the kickstand side.
- Align the dolly so the kickstand clears the casters.
- Slowly lower the lift until the bike rests securely on the dolly’s industrial rubber-padded crossbars.
Step 4: Mobility & Storage
Remove the lift and you are ready to roll. You can now move your Indian in any direction with a single hand. To store, simply engage the caster brakes.
