We all love a clean bike. There’s nothing better than rolling your motorcycle out into the sun and seeing the paint gleam. Most of us are pretty good at washing the basics—the fuel tank, the fenders, the seat. But if you want that truly deep, showroom-level shine, you have to go beyond the surface.
The problem is, these spots are notoriously hard to clean for two reasons: they’re a literal pain to reach, and the grime is too stubborn for a simple soap and water wash.
But what if you could solve both problems at once? With the right tools, you can turn a frustrating chore into a deeply satisfying project. We're tackling this with a one-two punch: The Let's Roll Lift & Dolly to bring the work to us, and BugSlide, the all-in-one cleaner and polish, to melt the grime away.
A Quick Note Before You Start: If your bike is caked in heavy mud, sand, or grit, give it a gentle pre-rinse with a hose first. This knocks off the heavy, abrasive particles that could scratch your finish. For the stubborn, oily, and baked-on grime that’s left behind, this detailing process is where the magic happens.
Spot #1: The Engine's Front & Underside
Why it's dirty: The front of your engine is a bug graveyard. It’s also constantly blasted with sand, tar, and oily road film. The area around the oil filter and drain plug inevitably collects greasy fingerprints and drips.
The Solution: Kneeling with a flashlight to clean under an engine is a thing of the past. The Let's Roll Lift & Dolly raises the entire bike to waist height, giving you a clear, well-lit view of the entire engine. Now you can easily spray BugSlide directly onto those baked-on bugs and oily surfaces. It’s formulated to be safe on engine finishes, cutting through the grime and leaving a clean, non-greasy finish that will actually be easier to clean next time.
Spot #2: The Swingarm & Rear Shock Linkage
Why it's dirty: This is ground zero for chain lube “fling.” That sticky lube combines with road dust to create a thick, gritty paste that covers the swingarm, the shock, and all the intricate suspension linkage parts.
The Solution: Trying to clean this area while crouched on the floor is impossible. With the bike on the Let's Roll Dolly, you can sit comfortably on a stool and have perfect access. The powerful cleaners in BugSlide are designed to break down that greasy chain lube residue without harming your bike’s finish. A quick spray and a wipe with a microfiber cloth, and your entire rear assembly will look factory-fresh.
Spot #3: Behind the Front Fender
Why it's dirty: The tight space between your front tire and the fender brace is a trap for everything the road can throw at it. It’s usually caked with a dense layer of dirt, sand, and ancient bug carcasses.
The Solution: The Let's Roll Dolly not only raises this area to eye level but also lets you spin the front wheel freely. This allows you to clean the entire inner surface of the fender and the fork brace without obstruction. A few sprays of BugSlide will rehydrate and lift the caked-on grime, making it easy to wipe away.
Spot #4: The Inner Wheel Rims (Barrels)
Why it's dirty: You wipe down the shiny, visible face of your wheels, but the inner "barrel" is a different story. This area is a magnet for road tar, chain lube sling (on the rear wheel), and grime that gets baked on hard.
The Solution: The Let's Roll dolly is the hero here, letting you spin the wheel freely to get 360-degree access to the entire inner rim. BugSlide is the perfect tool for this—it's a powerful degreaser for the oily grime but gentle enough for your painted or chrome rims.
Crucial Tip: To ensure safety, spray BugSlide onto your cleaning rag first, not directly onto the wheel. This gives you total control to clean the rim surface while keeping all cleaners away from your brake rotors and pads.
Spot #5: Under the Tail Section
Why it's dirty: The underside of your tail and the inner rear fender take a direct hit from tire spray. This results in a gritty film of dirty water, mud, and road grime that you can’t even see from a standing position.
The Solution: Lifting the bike with the Let's Roll Lift & Dolly reveals this hidden mess. You can easily reach up and under the tail section. BugSlide is perfect for this spot because it requires no water, meaning no drips running down your arms. It cleans and protects the plastic and metal surfaces, preventing future buildup.
Better Than Clean
A deep detail isn’t just about looking good. It’s about protecting your investment from the corrosive elements that try to ruin it. By combining the unparalleled access of the Let's Roll lift with the powerful, all-in-one formula of BugSlide, you’re not just cleaning your bike—you’re preserving it.
Ready to unlock a new level of clean? Gear up with the tools that deliver professional results in half the time.
Share:
How to Fit a Motorcycle in a One-Car Garage (Without Selling Your Car)