THE STURDIEST, SAFEST, MOST WELL BUILT MOTORCYCLE DOLLY ON THE MARKET

THE PERFECT MOTORCYCLE DOLLY–EASY TO USE, STRONG AND SUPERIOR CRAFTSMANSHIP

lets roll cruiser dolly vanity shot
Lets Roll Motorcycle Dolly

Indian Roadmaster w Let's Roll Cruiser Dolly

A big challenge we all have as motorcycle owners is the amount of free space we have in our storage area…

The Let’s Roll Cruiser motorcycle dolly is an easy-rolling motorcycle dolly for precise movement to store motorcycles–big and small. 

The motorcycle dolly works especially well for cruiser and touring size motorcycles. To lift your bike onto the motorcycle dolly in the safest way possible, we designed the Let’s Roll lift. The lift is a scissors lift that easily lifts your bike onto the dolly in one minute or less.

made in the usa emblem lets roll

lets roll package deal

AS WE ALL KNOW, OUR MOTORCYCLES ARE HEAVY, HARD TO MOVE, AND CAN TAKE UP A HUGE AMOUNT OF SPACE… 

Moving bike’s around a tight garage can be dangerous. We’ve all heard horror stories of bikes falling over in the garage, being damaged, or worse, falling on someone. That’s why we designed the perfect way to move and store your motorcycle. The Perfect Motorcycle Storage–Let’s Roll Dolly & Lift.

This dolly & lift is for motorcycle enthusiasts who are particular about the care of their motorcycle!

HOW THE LET’S ROLL MOTORCYCLE DOLLY & LIFT WORKS

1) Use a ratchet or drill to lift your motorcycle using the Let’s Roll lift.

2) Slide the motorcycle dolly under your bike

3) Lower your motorcycle onto the dolly

Safe motorcycle storage with let's Roll store

motorcycle dolly quiz

TAKES 60 SECONDS TO USE!

THE PAINS OF MOVING YOUR BIKE ARE NO MORE

One of the main things your motorcycle does is take up a lot of space when it’s on its kickstand. It’s also difficult to get it in the perfect place when you first ride it into your storage area. 

You have to turn your motorcycle off and move it around as much as you can before giving up and being satisfied with where it is. Until someone eventually asks you politely to move it out of the way because you have either taken up too much room or blocked something that is needed behind it!

This is why it makes perfect sense to have your motorcycle on a dolly that has a small footprint taking up minimal room. Allowing you to move it out of the way and not block your storage areas.

The Let’s Roll Cruiser motorcycle dolly and Let’s Roll lift is a must-have solution that provides the perfect answer to all of these annoying challenges.

BIKE STORAGE MADE SIMPLE

 

We all know that as soon as you put your bike somewhere, someone is asking you to move it. What a pain! But moving your bike around the garage is extremely easy with this motorcycle dolly. If you are particular about the care of your motorcycle, then this motorcycle dolly is just what you’ve been looking for!

SAFE AND SOLID GUARANTEED

Never worry about your bike falling over or off of the dolly. Our motorcycle dolly is built like a tank. Now you can feel secure that your motorcycle will be safe in anyone’s hands.

NO VELCRO OR TIE DOWNS!

The dolly is fitted with industrial rubber on the crossbars which means the dolly holds your motorcycle in a solid position so it won’t move at all.

Once your motorcycle is up on the dolly it’s not going to slide off. It is incredibly sturdy and safe, and even when moving it around it remains in place.

Moving the HD Fatboy into place for storage

STORE YOUR BIKE

Glide over cracks in your garage. Even feel comfortable to roll your bike on inclines. Now you can feel secure that your motorcycle will be safe in anyone’s hands.

 

JUST ABOUT ANYONE CAN MOVE THIS DOLLY AND LIFT

You can use the dolly and lift single-handedly. Anyone can now move the motorcycle out of the way if they ever want to reach for anything in storage that is being blocked by your motorcycle(s).

And you won’t have to worry that it will fall when someone else is moving it. When you can move your motorcycle around the garage without any hassle, everything changes. You no longer need to get it off its kickstand or use any strength because it’s sitting upright on the easy-to-roll Let’s Roll Cruiser dolly. 

When your motorcycle is on the dolly, you can move it anywhere you need and then hang up the lift on a hook (30 LBS) or place it on a shelf, and job done – the family is happy you won’t have to humbly thank the person for interrupting what they are doing to help you.

SMALLEST FOOTPRINT FOR ANY MOTORCYCLE DOLLY OUT THERE

When your motorcycle is on the dolly, you can move it anywhere you need and then hang up the lift on a hook (30 LBS) or place it on a shelf and job done.

Both can be stored on a shelf.

The 38 lb. dolly can be stored on a wall.

scissor lift hanging on wall
The 24 lb. scissor lift can be stored out of the way on your wall as well.

KEEPS YOUR BIKE OFF OF IT’S SUSPENSION

Another awesome feature is that your motorcycle is off its wheels and suspension. So not only is it easy to move, safe, and secure but you are lengthening the lifespan of your tires.

SIMPLIFIED MAINTENANCE, DETAILING, AND WASHING 

Moving your bike to do cleaning or maintenance is effortless with the Let’s Roll Motorcycle dolly. Just wheel it out into the driveway and you’re good to go.

SOLVES GETTING YOUR BIKE OUT OF A STEEP DRIVEWAY 

Pushing your motorcycle backward out of your garage and straight down a steep slope is not fun for anyone. So being able to turn it around in the garage is perfect. So the next time you drive your motorcycle into your storage space, kick out your stand, go grab the lift and dolly–slide the lift under your motorcycle, lift your bike up, slide the dolly under, drop your bike onto the dolly and you are done!

Then you can push your motorcycle over to the corner out of the way and go inside. It sits there safely until you are ready to ride again. And don’t forget that when it’s time for your next ride, you simply turn your motorcycle around, lower your motorcycle onto the ground, move the dolly and drive away…It simply becomes a natural thing to do.

WHY WE MADE THE PERFECT MOTORCYCLE STORAGE

Back in 2018, we bought a new white Harley Fat Boy Low. Having two bikes to store in the garage we needed to come up with two dollies to minimize the space required to store the bikes. We had previously purchased a dolly for our Ultra Limited, but it was unstable and difficult to move because of its small steel wheels. 

We also found that it damaged our epoxy-painted floors. We like to keep our motorcycles off of their suspension/wheels so that we could easily store and move them around the garage without having to start them up. We like them out of the way, with a protective cover over them as well. 

The problem was we couldn’t find a suitable dolly that was stable, easy to move, easy to get the bike onto, didn’t damage our epoxy floors, and didn’t end up with hydraulic leaks. This is why we decided to design and make a prototype so we could have what we wanted in a motorcycle dolly. The Let’s Roll Cruiser and Lift were born!

THE BUILD VIDEO

A DOLLY BUILT LIKE A TANK!

  • Heavy-duty 10-gauge* tubular steel construction
  • Zero-scuff TM 4” high-impact urethane** wheel design
  • 1,200 LB Capacity 
  • Super stable industrial rubber composition with a molecular mesh structure

*Gauge: A sheet metal gauge (sometimes spelled “gage”) indicates the standard thickness of sheet metal for a specific material. As the gauge number increases, the material thickness decreases.

**Urethane: a type of finish that is applied to many products. It provides protection against weathering, scratches, and temperature.

let's roll zero-scuff casters
Zero-scuff TM 4” High-impact Urethane Casters

lets roll cruiser dolly vanity shot
Lets Roll Cruiser Motorcycle Dolly

industrial rubber makes all the difference on the let's roll dolly
Thick Industrial Rubber

Totally satisfied with mine and had zero problems. Makes it super easy to move my Glide around my shop in these winter months. I especially love it for small jobs and complete detailing work.

— B.B.

$629.00

30-Day Money-Back Guarantee

lets roll package deal
made in the usa emblem lets roll
best buy emblem

THE LET’S ROLL LIFT–STRONG AND STURDY

The simple solution we came up with to lift your bike safely onto the dolly.

The lift has 1100 LB capacity featuring industrial, durable, rubber that protects the bottom of your bike. Your bike will not move or slide on the lift because of the excellent material properties. 

It’s so sturdy and secure that only one person is needed to get the heavy bike up onto this robust lift. The lift is low enough to slide under your bike and lift the bike while it is resting on the kickstand. Works well with a 7/8″ deep well socket and swivel head ratchet. 

lets roll lift for motorcycles

 

 

The industrial rubber composition provides the cross-linking that gives incredible resilience, flexibility, and durability. The excellent material properties come from a molecular mesh structure that makes it unbeatable in terms of elasticity and resistance to aging.

Scissor Lift Specs:

14L x 12W x 3.75H” – Resting position

14L x 12W x 12H” – Highest point

 

lets roll lift side view

 

 

 

 

1 Person Operation–Perfect for domestic harmony. 

Gone are the days of worrying about your motorcycle falling on you or your spouse. The fights about moving your bike out of the way are over! From a petite woman to an older gentleman, you can feel confident to move your bike on your own. It’s that easy.

If you own a garage that is limited in space or even if you have space, but your motorcycle is always in the way, it can start to cause problems for the whole family. The perfect solution for domestic harmony is to find a way to maximize the space you have and make it easy for the whole family to move your motorcycle…

Otherwise, it’s always going to be you who gets called to go out and move it! When you know that it’s easy and safe for your family to move your motorcycle, it’s so much better because it no longer becomes a hassle. 

 

 

Load, move and unload your motorcycle in just a few minutes single-handedly without marking your epoxy or concrete floor.

 

“I bought one at the Cleveland bike show for my Harley Ultra Limited. Love how easy it rolls around and how stable the bike is.”

— C.S.

THERE’S NOTHING BETTER OUT THERE–GOOGLE IT!

If you’ve been looking for an easier way to store or move your motorcycle, I’m guessing that you would have Googled for a storage solution and found lots of different options out there.

That’s how we first started ourselves. Our Google search showed us some interesting results. There seemed to be some great options but they also had their own challenges! Some dolly’s require riding onto it and putting your kickstand down, then rolling around on tiny wheels.

Others have straps to tie down your bike or required you to lock your front wheel in. Some of the lifts used ball bearings around the main nut and screw mechanism, which means they could fail and you would need replacements.

So who wants to pray to the ball bearing gods each time you store your motorcycle away? There seemed to be important things missing with the other dollys we tried…

So there we were with an expensive motorcycle – something we cherished. And knowing how heavy it was we wanted something strong, solid and easy to use. This meant we wanted a dolly and a lift combination… the Perfect Motorcycle Storage. 

So our choices began to decrease the more we researched… In the end, through pure desperation, we purchased something from China, and guess what? It failed to perform. And we ended up using it as unsatisfied customers. It marked up our floor and most of all, it wasn’t secure and safe.

anyone can move this motorcycle dolly

This is when the Let’s Roll Cruiser motorcycle dolly was born…

We wanted the perfect solution – something that would hold our motorcycle straight up and secure. It had to be clever in the way it used the weight of the motorcycle to keep it from rolling away on its own.

It needed to be solid and never slip or fall over. The casters couldn’t mark our floor and create those ugly black marks. It needed to be an easy-to-use dolly and lift combination solution that kept the motorcycle safe so we didn’t have to worry about the motorcycle falling.

The Package Deal: Let’s Roll Cruiser Dolly and Let’s Roll Lift

We wanted to show motorcycles the respect they deserve! We all know that if our motorcycle falls over, it can cause some serious damage and it’s hard to pick back up! This is why we have created a dolly that can take the weight yet still offer easy rolling movement.

Once your bike has been lowered onto the dolly you won’t require any locking of your wheels, but we still offer them as standard for your order if you do need them for any reason. No straps to hold it down. It is perfectly safe.

We have designed the dolly and lift as two separate pieces to allow for additional strength and safety. They are easy to use and easy to store away. This kicks in as an extra benefit if you have more than one motorcycle as well because all you need to do is buy an additional dolly. Not another dolly-lift combination. 

Indian Roadmaster w Let's Roll Cruiser Dolly
Indian Road Master with the Let’s Roll Dolly and the Indian Motorcycle Adapter Plate (IMAP)

Once you use the perfect motorcycle storage we know you will never want to go back to just using your kickstand again…

MADE IN THE USA!  

We have sourced the very best USA components to build the superb quality dolly and lift that you desire and expect from a USA based company.

We love the idea that we could make the lift and dolly in the USA. We have a fabricator for all of our manufacturing which makes it really easy to make sure the quality is controlled and always at its finest. We know you love your motorcycle as we do and if you are going to use a dolly and lift – it has to be solid and safe so you trust it 100%. 

WHAT LET’S ROLL MOTOR CRUISER DOLLY & LIFT OWNERS ARE SAYING

“My 2017 Harley Ultra Limited is a big, heavy bike. I don’t have a lot of room and I was constantly having to move things in and out of the garage to make working space.

When I saw the Let’s Roll Cruiser, I was thrilled. I have other wheeled stands for sportbikes, but couldn’t find one I had confidence in until I saw the Facebook advertisement for The Let’s Roll store received the cruiser and scissor jack, I was very impressed with the workmanship of both. I immediately put my bike up on the dolly and the result was the video I showed you.

Fantastic. I am trying to talk my wife into getting another one for her Sportster!

Great product, American Made! Absolutely happy and impressed with the dolly and I am certain I will be using it for years to come!

Thank you!”

—Shawn Hughes

“Great product. Well made. Customer service was beyond exceptional. The dolly moves easily on the carpet where my 2017 Indian Springfield is stored. Tip: align adapter plate pad with the drain plugs and leave about 1/2 inch space from the crossover exhaust pipe.

The adapter should be next to the inside of the kickstand bracket. This allows for quicker and safer placement of the bike onto the dolly. 100% recommend this product.”

— T.I.

“I think this product is outstanding. It’s very well built, easy to use.

The construction is very heavy duty. The wheels pivot easily and when I put my 850 lbs bike on it easily moves around my shop. The product is so well-liked 2 of my friends have bought it for their bikes.”

— Steve

LUV this dolly under my bike‼️ Easy & STABLE to move around for maint (oil drain & filter accessible) or for winter storage. It literally takes me 3min to lift the bike with your scissor jack, slide in the dolly, remove the jack. Simple STRONG design -thx for making this!

*It took me 60sec (lying next to bike with a tape measure & product pic/dimensions) to decide it would fit under my frame without any adapters.

* very strong and rolls easy on wheels that don’t mar my nice epoxy floor.

* 2 piece design; a jack to lift bike from sidestand position to level, then dolly to hold & move bike… I then remove the jack and use it to lift another bike or an ATV for servicing.

Great products made in the USA “

— Greg Kremer

$629.00

30-Day Money-Back Guarantee

lets roll package deal
made in the usa emblem lets roll
best buy emblem

Every shipment comes with your Certificate of Authenticity and our exclusive Lifetime warranty.

“Your dolly is working fantastic. I must admit I pondered for months whether to spend the money or not. I am so glad I did.

First, I think the quality is A-1 and the secure feeling of my 800+lb Road King is awesome. I can yank that thing all over my garage, no problem. Secondly, it’s simple and smartly built (the large wheels).

It’s true when people say, “You get what you pay for!” Thanks for a great dolly.”

— F.R.

BECOME THE OWNER OF THE PERFECT MOTORCYCLE STORAGE

The heavy-duty Let’s Roll Cruiser motorcycle dolly with 1200 lb capacity allows for easy movement for precise storage of your motorcycle. Stable and upright with our original zero-scuff™ 4″ casters that will not mark your epoxy or concrete floor. Two casters with brakes installed come standard with the dolly. Good for any size motorcycle. Caster components are imported and assembled in Texas.

The Let’s Roll Lift is super stable as well and is needed to use the dolly. Both are Made in Michigan, USA. This works on Indian motorcycles, Challenger, and Scouts.

 

 

Let’s Roll Scissor Lift

The Let’s Roll Lift is a scissor lift made in the USA that works well with motorcycles – big and small. Works well with a 7/8″ deep well socket and swivel head ratchet. (Does not need to be a deep well or swivel head)

The Lift has gone through testing to confirm engineering calculations and has been tested to failure. The root cause of the failure has been analyzed and the design has been changed to improve capacity. The failure point on the lift exceeds the rating of the lift and an unpublished service factor has been established. It is not published for consumer evaluation as that could be construed as an endorsement for additional capacity on the lift.

Scissor Lift Specs:

14L x 12W x 3.75H” – Resting position

14L x 12W x 12H” – Highest point

 

Ease of use with the Let's Roll Cruiser dolly

 

 

LR Cruiser Motorcycle Dolly

This heavy-duty motorcycle dolly with 1200 lb. capacity allows for easy movement for precise storage of your motorcycle without having to struggle to balance it. Stable and upright with no tie-downs or hydraulic leaks that make stains. A small footprint makes it easy for storage while not in use.

Good for any motorcycle that can be lifted from underneath between the wheels. Especially great for large cruiser and touring models. Caster components are imported and assembled in Texas.

 

 

Technical Specs:

  • Dolly bike frame measurements: 18″ Wide (outside dimensions), 14″ (inside dimensions)
  • Total dolly length: 35″
  • The industrial rubber composition provides the cross-linking that gives incredible resilience, flexibility, and durability. The excellent material properties come from a molecular mesh structure that makes it unbeatable in terms of elasticity and resistance to aging.
  • Zero-scuff™ 4” Caster design.
  • Scissor Lift Specs: 14L x 12W x 3.75H” – Resting position 14L x 12W x 10.5H” – Highest point
  • No tie-downs required. No hydraulic leaks.

 

“I have a single car garage and there was no way I was going to be able to fit my 2020 FatBoy in there with my car as well.

Then a Michigan native told me about Let’s Roll. The lift and dolly was a miracle on wheels! I was able to get my bike on the dolly, easily move it around on my garage and position it right up against the wall without the lean if it were on a kickstand.

Now my bike and car both fit in my garage, and I easily walk between. Best money I’ve spent on my bike (except for the bike itself!).”

— Bret

EASY 5 MINUTE ONE-TIME ASSEMBLY

Frequently Asked Questions

Will my bike fit your dolly?

The main thing to know is that your bike has a frame that is accessible without any piping, electrical cords, etc. that will be in the way so that a scissor lift can pick your bike up from underneath without hitting anything else but the frame. By using the measurements above of the lift you should be able to look under your bike to see if it will work on your motorcycle correctly. Once that is established to work, then take the measurements of the dolly, as seen above in the diagram, to see if that will fit appropriately under your motorcycle without interfering with anything as well. This is the test to ensure that the Let’s Roll Cruiser motorcycle dolly and Let’s Roll lift will work on your motorcycle.

What is your return policy?

Our policy is valid for a period of 60 calendar days from the date of the purchase. If you receive your order and are not satisfied for any reason you can return the product for a full refund. If the period of 60 days has elapsed since the purchase, we can’t, unfortunately, offer you a refund.

Refund requirements:

The following criteria must be met to qualify for a refund:

  • Product is defective.
  • The product must not be damaged upon the return.

In order to ensure the above criteria has been met, all returns will be inspected. If the product does not meet the listed criteria, we reserve the right not to issue a refund.

Shipping items:

In order to return an order, you must contact us first and obtain and include a Return Merchandise Authorization (RMA). Email us at sales@letsrollstore to obtain an RMA. Returns will not be accepted without a valid Return Merchandise Authorization.

Returns are to be mailed to: Let’s Roll Store, 9350 Apple Crest Drive, Saline MI 48176.

You will be responsible for paying for the shipping costs with regard to the items that you wish to return. We will not refund the shipping costs.

What kind of guarantee do you have on your products?

Exclusive lifetime Warranty that your dolly and lift will not fail if properly used.

What are the dimensions of the motorcycle lift?

Regular Lift:

14 x 12 x 4.25″ in the resting position

14 x 12 x 12.5″ in the highest position

Lower Profile Lift:

14 x 12 x 3.5″ in the resting position

14 x 12 x 12.5″ in the highest position

Will my motorcycle be able to use a scissor lift or platform jack?

NOTE TO INDIAN MOTORCYCLE OWNERS: If you have the ThunderStroke TS111 or TS116 engine, this dolly and lift storage system will work for you using the new Indian Motorcycle Adapter Plate (IMAP). No need for the IMAP on the Challenger, and all Scouts.

DOWNLOAD OUR COMPATIBILITY CHART HERE

How secure is the motorcycle on the dolly and lift?

Very secure due to the rubber padding that is adhered to the crossbars and the design of the dolly frame.

“HAPPY NEW YEAR!! I have your dollies and your lifts…I do not know how I ever did without them. I have 4 dollies and 2 lifts.

I use them on my Harley Davidson stored in my Man-cave/shop.

I have 5 Harleys that I switch off riding. When not in use they are on their dolly for optimal storage and positioning. I LOVE your product it has superior craftsmanship, looks sharp, and is easy to use. If I expand my collection I will be back for my next one. I’m considering one for my son’s birthday I will let you know. You make an awesome dolly, I love them…all 4… LOL!!!”

— D.S.

$629.00

30-Day Money-Back Guarantee

lets roll package deal
made in the usa emblem lets roll
best buy emblem

“Product is well made, well packaged and assembly is easy.

Put my CVO Street Glide on it and I can move it around the garage with ease. Great product.”

— G.D. 

“Initially, I thought the price seemed a bit high.. Based on what appeared to be high quality I went ahead and ordered the package deal.. It’s worth every dollar and more… The quality and workmanship borders of perfection..

This was a solid and smart investment for me and my new Harley.”

— S.C.

When developing the Perfect Motorcycle Storage, we made sure it solved all the issues we had previously experienced with a competitor’s model…

We knew it had to have large 4” casters, it also had to be built from a 10-gauge tubular steel frame to make it solid and sturdy. We added industrial non-slip rubber to make sure the bike wouldn’t slide on the dolly.

This means you can easily put your bike on and off with confidence by yourself. This perfect motorcycle storage is especially useful if you own more than one bike because they both can sit straight up on their dollies and be stored side-by-side.

THE BUILD

“LR CRUISER DOLLY/LIFT, and Brake Casters. I think this system is a “must-have!” The system is durable, strong, easy to use, and a small footprint so it doesn’t require a large space for storage.

Look no further! This is the system for EVERYONE!”

— Fred

THE VERY BEST MANUFACTURING RIGHT HERE IN THE USA

The fabricator for the dolly is fully ISO compliant (ISO 9001: 2015). Which means there is a standard used by organizations to demonstrate their ability to consistently provide products and services that meet customer and regulatory requirements and to demonstrate continuous improvement. Even the operators are trained in ISO as well. So if they run into problems, they stop right away to see what has occurred and make the proper corrections.

We have sourced the very best USA components to build the superb quality dolly and lift that you desire and expect from a USA based company. With our background in the automotive field since 1988 working in the Detroit, Michigan market we were able to obtain a great fabricator that does superb, quality craftsmanship to bring to you an end product you will have a lifetime and can pass on down to your family. 

Which means you get peace of mind knowing that the dolly frame and lift are USA made and built at the highest quality and standards – specifically for the motorcycle industry – to provide you with the perfect motorcycle storage. Your dolly and lift will not disappoint because you know when you see it, it is built rock solid and safe, you can even let your kids move it or your grandpa…

Whoever you choose, your motorcycle is safe with us. Guaranteed. Money-back guarantee for 30 days. Lifetime warranty.

MEET THE FOUNDERS
DAN & RENEE – FOUNDERS OF LETS ROLL MOTOR CRUISER

Back in 2018, we bought a new white Harley Fat Boy Low…

Having two bikes to store in the garage we needed to come up with two dollies to minimize the space required to store the bikes. We had previously purchased a dolly for our Ultra Limited, but it was unstable and difficult to move with small steel wheels. We also found that it damaged our epoxy painted floors.

about us lets roll cruiser dolly

We like to keep our motorcycles off of their suspension/wheels so that we can easily store and move them around the garage without having to start them up. We like them out of the way, with a protective cover over them.

The problem was we couldn’t find a suitable dolly that was stable, easy to move, easy to get the bike onto, didn’t damage our epoxy floors and didn’t end up with hydraulic leaks. Which is why we decided to design and make a prototype so we could have what we wanted in a motorcycle dolly.

With an engineering background in the manufacturing world and selling metal finishing equipment and supplies, we knew the right people for fabrication and we knew how to get products designed and built.

Which meant all we needed to do was work with a business partner to design and fabricate a couple of dolly prototypes to test and store our bikes. We made a couple of adjustments and came up with a final product. The Let’s Roll Cruiser motorcycle dolly was born!

When developing the Let’s Roll Cruiser dolly, we made sure it answered up to all the issues we experienced with the one we had already bought and others on the market. We knew it had to have large 4” casters, it also had to be built from a 10-gauge tubular steel frame to make it solid and sturdy.

We added industrial rubber to the crossbars to keep the bike from sliding on the dolly. Which meant, it only required one person to put the motorcycle on and off! The two bikes are now sitting straight up on their dolly and require the least amount of space to store them side-by-side. If you are ready to add the perfect motorcycle dolly to your life and eliminate all the hassles that come from storing your bike in a crowded garage then get yours right now!

lets roll lift for motorcycles

Here are just a few reasons why Let’s Roll–Made in the USA–will completely change how you store and care for your bike…

  • 1 Person Operation -“Perfect for domestic harmony”. 
  • Proprietary Design for 1-minute Setup. 
  • Smaller Footprint. 
  • No additional hidden fee for repair kits, velcro or tie-downs. 
  • Our original Zero-scuffTM 4” high-impact urethane wheel design.
  • Avoid hydraulic leaks, stains or clean-up.
  • Dolly and Lift, Made in the USA.
  • Every shipment comes with your Certificate of Authenticity and LIFETIME WARRANTY.
  • 1,200 LB Capacity for Dolly; 1,100 LB Capacity for Lift. 
  • Veterans, Current Military, and First Responders, 10% off. 
  • Super stable, motorcycle won’t shift on frame; The bike frame sits on crossbars with industrial rubber. The same industrial rubber is on the lift as well.
  • Super easy to move and doesn’t get hung up on concrete seams.
  • Bike tires are off the ground and the weight is off the suspension.
  • Bike is upright, resting on the frame, not the kickstand. 
  • Adjustable height. 
  • Heavy-duty 10-gauge tubular steel construction.
  • Powder-coated to a textured matte black finish. 

lets roll cruiser dolly vanity shot
Lets Roll Motorcycle dolly

lets roll motorcycle lift on epoxy floors

The whole reason we created the Let’s Roll Cruiser Motorcycle dolly was to help make your life easier by providing the perfect motorcycle storage with safety as the top priority.

“I was looking for a way to not only store my bike but work on it as well.

The dolly is perfect! It’s excellent quality and I really like the wheels as they move great on my garage floor and over joints. Fantastic product!”

— K.J.

“I purchased the dolly and lift from the owners directly at the Cleveland motorcycle show in January. I have my HD SG on the lift for the winter months and absolutely love it. I must mention that I’m about 130 lbs and fairly new rider so putting a 900 lb bike on the dolly makes it super easy to move around my garage.

I would recommend this product and plan on purchasing for my Heritage. Also, this is a local company that I would want to support during these difficult times. Owners were very nice and helpful showing me in person how easy to use their product. Happy Customer!”

— C.L.

BECOME A PROUD OWNER OF THE PERFECT MOTORCYCLE STORAGE TODAY–ORDER NOW!

“I finally broke down and bought one…

WHAT TOOK ME SO LONG????

This is the best way to move a bike in close quarters that I have found … a very good investment indeed! I got one about 3 months ago… I can now fit the bike into a corner and still get 2 cars in the ‘2 car garage’ moves with little effort and is great for a 69-year-old rider..it was easy to assemble and the quality is fantastic!!

4-inch wheels and heavy steel tubing make it easily roll over cracks in the concrete floor. I recommend it!”

— J.S.

“What I like about my Let’s Roll dolly system is the small profile for storage and that I can put my bike up on just their jack (which doesn’t have all that stuff in the way), and on the dolly there’s still very little stuff sticking out and getting in the way of working on the bike.

I feel like it’s a lot more effortless to move the bike around as well.”

— C.L.

BUY NOW!


Let's Roll Lift and Let's Roll Cruiser Motorcycle Dolly Let’s Roll Motorcycle Dolly and Lift Package Deal $629.00
The Let's Roll Dolly LR Cruiser Motorcycle Dolly  (No brakes added, Yes, add 1 set of brakes for casters, Add 2 sets of brakes for casters) $395.00
IMAP - Indian Motorcycle Adapter Plate Indian Motorcycle Adapter Plate $69.00

Billing details

Your order

Product
Quantity
Total
Cart Subtotal $0.00
Tax $0.00
Order Total $0.00
  • Pay via PayPal; you can pay with your credit card if you don’t have a PayPal account.

Your personal data will be used to process your order, support your experience throughout this website, and for other purposes described in our privacy policy.


“Best product ever for storing your bike. Easy to use, even for a 70+-year-old man.”

—C.T.

THIS IS THE PERFECT MOTORCYCLE STORAGE

“My wife came across this on the internet so we ordered it. Seemed like a lot of money but when you try it you’re sold on it. Stores our HD Limited perfectly. And I can clean the wheels anytime I want.”

— R.J.

The Let's Roll Dolly and Pro Lift

Let’s Roll Pro Package Deal

Let's Roll Lift and Let's Roll Cruiser Motorcycle Dolly

Let’s Roll Package Deal

The Let's Roll Dolly

Let’s Roll Motorcycle Dolly

The Let's Roll Standard Lift

Let’s Roll Standard Lift

The Let's Roll Pro Lift

Let’s Roll Pro Lift

The Let's Roll Wall Rack

Let’s Roll Wall Rack

IMAP - Indian Motorcycle Adapter Plate

Indian adapter plate

Scissor Lift Felt

Scissor lift felt

The Let's Roll Dolly Caster

Brakes for casters

Let's Roll Shirt

Let’s Roll T-shirt

Let's Roll Hat

Let’s Roll Hat

Let's Roll Black Bandana

Let’s Roll Bandana

Let's Roll Shirt

Let’s Roll T-shirt

Let's Roll Hat

Let’s Roll Hat

Let's Roll Black Bandana

Let’s Roll Bandana

The Let's Roll Wall Rack

Let’s Roll Wall Rack

IMAP - Indian Motorcycle Adapter Plate

Indian adapter plate

Scissor Lift Felt

Scissor lift felt

The Let's Roll Dolly Caster

Brakes for casters

Let's Roll Lift and Let's Roll Cruiser Motorcycle Dolly

Let’s Roll Package Deal

The Let's Roll Dolly and Pro Lift

Let’s Roll Pro Package Deal

The Let's Roll Dolly

Let’s Roll Motorcycle Dolly

Let's Roll Lift and Let's Roll Cruiser Motorcycle Dolly

Let’s Roll Package Deal

The Let's Roll Dolly and Pro Lift

Let’s Roll Pro Package Deal

The Let's Roll Standard Lift

Let’s Roll Standard Lift

The Let's Roll Pro Lift

Let’s Roll Pro Lift